Wacom CapPLUS™ Standard Specifications
The following specifications reflect the standards that Wacom uses for design of its CapPLUS components as of the last update of this website. They are subject to change without notice. They may not apply to new products and do not apply to custom touch parts. Please refer to the shipment specifications of the part numbers you are most interested in for exact specifications.
| Touch Technology | Surface Capacitive (Wacom RRFC™) – Single-Finger Touch |
| Touch Input Method | Bare finger and thin plastic gloves |
| Product Size Range | Up to 32 inch active area diagonal |
| Panel Construction | Antiglare-Antismudge hardcoat, ATO sensing layer, and ITO backshield on 3.2mm thick glass substrate |
| Tail Type | Copper Flex, foldable, <0.13mm thick, ZIF connection |
| Surface Hardness | Greater than Mohs 6 |
| Optical Performance1 |
Transmissivity >84% (86% typical) Haze 4-13% Gloss 65-89 |
| Enclosure Sealing | Greater than IP65 using readily-available gasketing materials2 |
| Surface Chemical Resistance | See full list below |
| Linearity/Accuracy | <1.5% of active area diagonal (typical bare finger touch) across whole size range |
| Touchpoint Reporting Rate | 144 per second (default) |
| Touchpoint Conversion Time | 7.0ms |
| Electrostatic Discharge (ESD) | 8kV contact / 15kV air on touch surface active area3 |
| Current Consumption | 75mA touch mode (typical) |
| Output Resolution | 4096 x 4096 (12 bit) |
| Host Interface | USB 1.1 Full Speed (bus-powered) and RS232 (5-12VDC power) |
| Interface Switching | USB HID, Serial PnP and USB-Serial hot-switch enabled |
| Controller Dimensions | 61.9 mm x 33.0 mm |
| Temperature Range |
Operating: -20°C to +70°C Storage: -40°C (panel) or -25°C (controller) to +85°C |
| Relative Humidity non-condensing |
Operating: 0% (controller) or 20% (panel) to 90% Storage: 0% (controller) or 20% (panel) to 95% |
| Global Limited Warranty | 5 years for touch panel and controller |
| Regulatory | UL, cUL, FCC, CE, IEC 60950, EN55022, EN 55024, RoHS |
1 sizes less than 26”. For larger sizes, please consult the shipment specification document.
2 please consult the Wacom CapPLUS Integration Manual or technical support for more information.
3 when connected to a properly grounded Wacom CapPLUS controller.
Chemical Resistance
Wacom CapPLUS touch panels resist nearly all common forms of cleaning materials, various solvents, spilled beverages and other substances that often come in contact with fingers.
There will be no effect from the following materials when rubbing an impregnated piece of gauze on the touch surface for 5 minutes with nominal load of 100g:
Methanol, Ethanol, Isopropyl Alcohol, Acetone, Methyl Ethyl Ketone, Toluene, Xylene, Machine Oil, Gasoline, Hand Creams, Nail Polish Remover, Styling Spritz, Acidic and Alkaline Sweat, Ketchup, Mustard, Mayonnaise, Vinegar, Beer, Coca-Cola and Coffee
Visual Inspection Criteria
Please refer to the shipment specification for the specific Wacom CapPLUS touch panel. If you do not have the specification, please contact technical support.
